STTARS General Information

Equipment Standards

• All machines must have operating front and rear brakes.
• Headlight, taillight and turn signals must be removed or have their lense covered with tape.
• Center and sidestand must be removed.
• All engine, transmission and final-drive-unit oil drain plugs must be safety wired or have a glob of 3M Weather strip cement (aka; gorilla snot) smeared upon the bolt head and adjoining surface.
• Cooling system must not contain anti-freeze. Tip: Use distilled water with WaterWetter added.
• Carburetor vent tubes must be routed into a catch bottle of at least 6 oz. capacity.
  

Number Plates

• Must have a suitable number plate surface on the front and both sides of the bike.
• Motocross or dirt track style plates are recommended.
• The plate's background color must contrast with the color of the numbers used so that you can be scored.
• Sportsman bikes may use a stock enduro-type front plate. 
  

Approved Tires

• Class "C" dirt-track tires
• Roadrace slicks, cut slicks or rain tires
• Any DOT tire
• DOT knobbies are allowed
  

Required Riding Gear

• Roadrace or dirt-track leathers are highly recommended.
• Motocross gear will be allowed, but must include knee cups, hip pads, elbow pads and a chest/back protector or heavy enduro jacket.
• Boots must offer full ankle protection.
• Roadrace, street or suitably protective gloves.
• Undamaged full-face road or motocross helmet with face shield or goggles.

Class Structure